Acidic
Yes

Active Ingredients
Alkyl (50% C14, 40% C12, 10% C16) Dimethyl Benzyl Ammonium Chloride
Citric Acid
Hydrogen peroxide

Animal Type
Cat

Brand Name
Reckitt Benckiser plc

Cleaner Size
6" Width x 8" Length

Contact Time
1 Minute
10 Minute
15 Second

Dilution System
Yes

Directions/Instructions
<h5>To Sanitize Your Laundry</h5>Add to rinse cycle and leave product in rinse cycle for 16 minutes.<h5>To Disinfect:</h5>Pour 2 capfuls into 1 gallon of cold water.Soak items for 15 minutes.Rinse thoroughly with clean water or machine wash as directed.Usage:For standard machines:Add 2 capfuls each filled to line 1 of the dosing cup to the fabric softener compartment or directly to your rinse cycle wash.For HE machines:Add 2 capfuls each filled to line 2 of the dosing cup to the fabric softener compartment or directly to your rinse cycle wash.To sanitize:Add to rinse cycle and leave product in rinse cycle for 16 minutes.To disinfect:Pour 2 capfuls into 1 gallon of cold water. Soak items for 15 minutes. Rinse thoroughly with clean water or machine wash as directedFirst Aid: If in eyes:Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Call a Poison Control Center or doctor for treatment advice.If on skin:Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a Poison Control Center or doctor for treatment advice.
To clean / remove allergens: <ul> <li>Use fresh wipe on surface.</li> <li>For surfaces that come in contact with food, rinse thoroughly with water.</li> <li>Repeat for stubborn stains.</li> </ul> To sanitize / disinfect: <ul> <li>Pre-clean surface.</li> <li>Use enough fresh wipes to thoroughly wet surface.</li> </ul> To sanitize: <ul> <li>Allow to remain wet for 10 seconds.</li> </ul> To disinfect: <ul> <li>Allow to remain wet for 4 minutes.</li> <li>Allow surface to air dry. Toss dirty wipe away.</li> <li>To prevent the growth of mold and mildew and their odors:</li> <li>Pre-clean hard, non-porous surface</li> <li>Wipe surface and allow to remain wet for 10 minutes</li> <li>Allow surface to air dry</li> <li>Repeat applications in weekly intervals or when mold and mildew growth appears</li> </ul>
To clean soap scum and greasy soil:Allow product to sit to penetrate soil before wiping clean. Repeat if necessary.To Disinfect:Pre-clean surface.Apply to surface until thoroughly wet.Leave for 10 minutes before wiping.READ MORE USAGE INSTRUCTIONSOnly use on hard, non-porous surfaces.To operate:Turn nozzle counter clockwise to preferred usage.To refill:Remove trigger sprayer. Pour in product from refill container and replace trigger.To clean:Apply to surface until thoroughly wet. Wipe with a clean cloth or sponge. No rinsing required.To clean soap scum and greasy soil:Allow product to sit to penetrate soil before wiping clean. Repeat if necessary.To disinfect:Pre-clean surface.Apply to surface until thoroughly wet. Leave for 10 minutes before wiping. Rinse all food contact surfaces with water after use.
To Control the Growth of Mold and Mildew:Apply to pre-cleaned surface.Let surface remain wet for 3 minutes before wiping.Repeat application at weekly intervals or when mold and mildew growth appears.To Sanitize and Disinfect:Pre-clean surface. Spray surface until covered with foam.To sanitize:Leave for 30 seconds before wipingTo disinfect:Leave for 10 minutes before wiping
To Sanitize and Disinfect: <ul> <li>Pre-clean surface.</li> <li>Hold can upright 6" to 8" from surface.</li> <li>Spray 3 to 4 seconds until covered with mist.</li> <li>To sanitize:</li> <li>Surfaces must remain wet for 10 seconds then allow to air dry.</li> <li>To disinfect:</li> <li>Surfaces must remain wet for 3 minutes then allow to air dry.</li> </ul> To Control and Prevent Mold and Mildew: <ul> <li>Apply to pre-cleaned surface</li> <li>Allow to remain wet for 3 minutes</li> <li>Let air dry</li> <li>Repeat applications in weekly intervals or when mold and mildew growth appears</li> </ul> Use on hard, non-porous surfaces <ul> <li>Pre-clean surfaces prior to use.</li> <li>Hold can upright 6 to 8 inches from surface.</li> <li>Spray 3 to 4 seconds until covered with mist.</li> <li>Rinse toys and food contact surfaces with potable water after use.</li> </ul> To disinfect: <ul> <li>Surfaces must remain wet for 3 minutes then allow to air dry.</li> <li>For Norovirus surfaces must remain wet for 10 minutes then allow to air dry</li> </ul> To sanitize: <ul> <li>Surfaces must remain wet for 10 seconds then allow to air dry.</li> </ul> To control and prevent mold and mildew: <ul> <li>Apply to pre-cleaned surface.</li> <li>Allow to remain wet for 3 minutes.</li> <li>Let air dry.</li> <li>Repeat applications in weekly intervals or when mold and mildew growth appears.</li> </ul> To deodorize: <ul> <li>Spray on surfaces as needed.</li> </ul> To spot sanitize soft surfaces: <ul> <li>Spray until fabric is wet.</li> <li>DO NOT SATURATE.</li> <li>Fabric must remain wet for 30 seconds.</li> <li>Let air dry.</li> <li>For difficult odors, repeat application.</li> </ul>
To Sanitize and Disinfect:Pre-clean surface. Use enough fresh wipes to thoroughly wet surface.To sanitize: Allow to remain wet for 10 seconds.To disinfect: Allow to remain wet for 4 minutes.To Clean and Remove Allergens<ul><li>Use fresh wipe on surface.</li><li>For surfaces that come in contact with food, rinse thoroughly with water.</li><li>Repeat for stubborn stains.</li></ul>
TO SANITIZE AND DISINFECT:Pre-clean surface.Hold can upright 6" to 8" from surface.Spray 3 to 4 seconds until covered with mist.To sanitize:Surfaces must remain wet for 10 seconds then allow to air dry.To disinfect:Surfaces must remain wet for 3 minutes then allow to air dry.Use on hard, non-porous surfacesPre-clean surfaces prior to use.Hold can upright 6 to 8 inches from surface.Spray 3 to 4 seconds until covered with mist.Rinse toys and food contact surfaces with potable water after use.To disinfect:Surfaces must remain wet for 3 minutes then allow to air dry.For Norovirus surfaces must remain wet for 10 minutes then allow to air dryTo sanitize:Surfaces must remain wet for 10 seconds then allow to air dry.To control and prevent mold and mildew:Apply to pre-cleaned surface.Allow to remain wet for 3 minutes.Let air dry.Repeat applications in weekly intervals or when mold and mildew growth appears.To deodorize:Spray on surfaces as needed.To spot sanitize soft surfaces:Spray until fabric is wet.DO NOT SATURATE.Fabric must remain wet for 30 seconds.Let air dry.For difficult odors, repeat application.
To Sanitize and Disinfect:Pre-clean surface.Use enough fresh wipes to thoroughly wet surface.To sanitize:Allow to remain wet for 10 seconds.To disinfect:Allow to remain wet for 4 minutes.To Clean and Remove Allergens<ul><li>Use fresh wipe on surface.</li><li>For surfaces that come in contact with food, rinse thoroughly with water.</li><li>Repeat for stubborn stains.</li></ul>
Usage InformationWear rubber gloves. To open, press tab in and hold down while turning nozzle. Spray surface to cover soiled area. Wipe with damp cloth or sponge. Rinse well with water. To close, turn nozzle back until tab locks into position. Always re-close after use and store closed. Note: Do not use on natural marble, stone, terrazzo, polished or anodized aluminum, metallic or painted surfaces, colored grout or counter tops. May etch some older or worn porcelain tubs and sinks or ceramic tile. If in doubt, test hidden areas first. Avoid contact with wood, fabric and wallpaper. Wipe up spills immediately and rinse with water. Not for use on food contact surfaces. Do not use on cookware, coffee makers, tea kettles, humidifiers and washing machines.
TO CLEAN AND DISINFECT:<ul><li data-list="bullet">Apply to surface until thoroughly wet</li><li data-list="bullet">Wipe with a clean cloth or sponge</li></ul>To disinfect:<ul><li data-list="bullet">Pre-clean surface</li><li data-list="bullet">Apply to surface until thoroughly wet</li><li data-list="bullet">Leave on for 10 minutes before wiping</li><li data-list="bullet">A dirty, grimey corner of a tiled shower</li></ul> TO CLEAN SOAP SCUM AND LIMESCALE:<ul><li data-list="bullet">Allow product to sit to penetrate soil before wiping</li><li data-list="bullet">Repeat if necessary</li></ul> To operate:<ul><li data-list="bullet">Turn nozzle counter clockwise to preferred usage</li></ul>To clean:<ul><li data-list="bullet">Apply to surface until thoroughly wet</li><li data-list="bullet">Wipe with a clean cloth or sponge</li><li data-list="bullet">No rinsing required</li></ul> To clean soap scum and limescale:<ul><li data-list="bullet">Allow product to sit to penetrate soil before wiping</li><li data-list="bullet">Repeat if necessary</li></ul> To disinfect:<ul><li data-list="bullet">Pre-clean surface</li><li data-list="bullet">Apply to surface until thoroughly wet</li><li data-list="bullet">Leave on for 10 minutes before wiping</li><li data-list="bullet">Rinse all food contact surfaces with water after use</li><li data-list="bullet">Does not harm most surfaces. Rinse bathtub/shower surfaces with water after using product.</li><li data-list="bullet">Do not use on eating/cooking utensils, glasses/dishes or cookware, unfinished, oiled or waxed wood floors.</li><li data-list="bullet">On painted surfaces, test a small inconspicuous area first.</li><li data-list="bullet">Not recommended for use on marble, brass, acrylic plastic or unfinished wood surfaces.</li></ul>
DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read the entire label before using product. To Open Child Resistant Cap: Hold bottle firmly with one hand on a flat surface. With other hand, squeeze sides of cap where indicated while turning counterclockwise. Do not remove cap. Do not squeeze bottle when opening. To reseal, twist cap clockwise until tightly closed. <ul> <li>To Clean / Disinfect / Sanitize:</li> <li>Flush toilet before cleaning.</li> <li>Apply 4 fl. oz. to coat the bowl including under the rim. Do not close lid.</li> <li>To Clean: Scrub entire bowl and under rim thoroughly. / Disinfect: Let sit for 10 minutes. / Sanitize: Let sit for 30 seconds. Then flush. </li> <li>Rinse brush in fresh water after use. Repeat if needed.</li> <li>To Remove Tough Stains: Apply a generous amount of liquid directly onto the tough stains. For severe rust stains, if possible, remove water Do not from bowl first. Let soak for 15 minutes. Follow cleaning directions above. close lid. Repeat if necessary.</li> </ul>
DIRECTIONS FOR USE: <ul> <li>Remove one tablet from its protective wrapper.</li> <li>Place the unwrapped tablet in the main dishwasher / detergent dispenser and close. <ul> <li>Use one tablet per wash load. If tablet does not fit, consult the dishwasher manufacturer or manual for advice.</li> <li>Optimal water temperature is 125° - 140° F. Finish® Powerball® tabs dissolve completely in wash cycle.</li> </ul> </li> </ul> In hard water conditions, it may be necessary to continue to use FINISH® JET-DRY® Rinse Agent for optimal results. In extreme hard water conditions, monthly use of FINISH® Dishwasher Cleaner may be necessary for optimal results.
For spot cleaning: spray in cold oven from a 9-12 inches distance; allow to stand for 30 sec; wipe clean with a wet sponge, cloth or paper towel For deep cleaning: pre-heat oven (200°F) & turn off; spray from a 9-12 inches distance; exposure time fot spot clean is 30s to 1 min and for deep clean is 1 hour 15 minutes; wipe clean with a wet sponge, cloth or paper towel <ul> <li>Need to wear long gloves</li> <li>Hold can upright, pointed away from face</li> <li>Always follow all the directions as stated on product label</li> </ul>
<ul> <li>Test a hidden section of carpet for colorfastness. Allow test area to dry completely and observe for any color change.</li> <li> Remove solid residue and blot up excess moisture with a clean, colorfast cloth or sponge. </li> <li> Spray area with Resolve® Pet Stain Remover for Carpet. Wait five minutes. </li> <li> Blot or rub gently with a clean, damp, colorfast cloth or sponge. Rinse, repeat until carpet is clean as necessary. </li> </ul>

Effective Duration
60 Day
Oil

Freshener/Sanitizer Type
Oil
Spray

Freshener/Sanitizer Volume
0.6 fl oz (0 quart)
10 fl oz (0.3 quart)
6.2 fl oz (0.2 quart)
Oil

Freshener/Sanitizer Weight
6.17 oz

Manufacturer Part Number
35

Marketing Information
Scratch Remover

Non-Acidic
Yes

Recycled Content
0%
25%

Volume Capacity
1 quart

Popular tags

View all

Reckitt Benckiser plc

View as Grid List

Sort by

Display per page

Lysol Clean/Fresh Lavender Cleaner

RAC88786CT

Liquid - 144 fl oz (4.5 quart) - Clean & Fresh Lavender Orchid Scent - 4 / Carton - Purple

$76.00 $74.54

Air Wick Pure 24/7 Summer Air Spray Kit

RAC88410CT

Spray - Summer Delights - 60 Day - 4 / Carton

$82.96

Professional Lysol Deodorizing Cleaner

RAC99985CT

For Multi Surface - Concentrate - 128 fl oz (4 quart) - Lemon Scent - 4 / Carton - Deodorize, Disinfectant, Versatile, Bactericide, Virucidal - Yellow

$94.72