Filter by attributes Directions/Instructions <p> DIRECTIONS: Hold can upright. Press button and spray a small area until wet. Use sparingly. Clean with one cloth and polish with a clean, dry cloth. Not to be used on cooking utensils, such as pots, pans, knives, forks or spoons </p> <p><b>Automatic Scrubbing Machines</b></p><p>1. Dust mop or sweep.</p><p>2. Blockade areas to be cleaned. Floors will be very slippery until dry.</p><p>3. Add four (4) oz. per gallon (30mL per liter) of this product to lukewarm water. Scrub floor with product. Trail mop excessive wet areas behind scrubber. Do not rinse floor after cleaning.</p><p>4. Let floor dry completely.</p><p><b>Mop and Bucket Cleaning</b></p><p>1. Dust mop or sweep.</p><p>2. Blockade areas to be cleaned. Floors will be very slippery until dry.</p><p>3. Add two (2) oz. per gallon (15 mL per liter) of this product to lukewarm water. Mop floor clean with this product. Pick up soil and excess cleaner with a tightly wrung-out cleaning mop. Do not rinse floor after cleaning.</p><p>4. Let floor dry completely.</p><p><b>Stone/Concrete Floor Daily cleaning (Automatic Scrubbing Machine):</b></p><p>1. Dust mop or sweep floor.</p><p>2. Blockade areas to be cleaned. Floors will be very slippery until dry.</p><p>3. Add (1) oz. per gallon of this product to warm water. Scrub floor with product and Twister™ Intellipad®. Trail mop excessive wet areas behind scrubber. Do not rinse floor after cleaning.</p><p>4. Let floor dry completely.</p><p><b>Stone/Concrete Floor Rejuvenation (Mop and Bucket method):</b></p><p>1. Dust mop or sweep floor.</p><p>2. Blockade areas to be cleaned. Floors will be very slippery until dry.</p><p>3. Clean floor with a neutral floor cleaner according to label directions. </p><p>4. Add thirteen (13) oz. per gallon (101 mL per liter) of this product to lukewarm water. Pick up soil and excess cleaner with a tightly wrung-out cleaning mop. Do not rinse floor after cleaning.</p><p>5. Let air dry.</p><p>6. For optimal gloss, burnish the floor with Twister™ Intellipad®.</p><p><b>Stone/Concrete Restoration:</b></p><p>1. Dust mop or sweep floor.</p><p>2. Blockade areas to be cleaned. Floors will be very slippery until dry.</p><p>3. Clean floor with a neutral floor cleaner according to label directions.</p><p>4. Dilute this product with lukewarm water at a 1:1 dilution ratio. Apply up to 2 coats using a string mop or flat mop until desired shine is achieved. Be sure to evenly cover the entire floor. Do not rinse floor after cleaning.</p><p>5. Let air dry.</p><p>6. For optimal gloss, burnish the floor with Twister™ Intellipad®.</p><p><b>Best Results</b></p><ul><li>Do not use on surfaces colder than 50°F/10°C.</li><li>To avoid contamination, do not return unused product to original container.</li></ul><p><br /></p><p>Note: Floors will be slippery when wet or contaminated with foreign materials.Promptly clean-up spills and foreign materials. Not intended for use in outdoor areas. Meets ASTM D-2047 requirements for slip resistance. Rubber Floors: For optimum appearance, alternate use of this product at standard dilution and ProfiTM/MC Degreaser once desired shine is achieved. On heavily worn rubber floors apply up to three coats of WiwaxTM/MC ProX Maintenance Emulsion using the mop and bucket cleaning instructions with a 1:1 dilution ratio until desired shine is achieved. If high gloss is desired, apply instead, three coats of Carefree® Max ProX Floor Finish.</p> <p><b>DIRECTIONS - READ BEFORE USE: </b>Protect eyes with glasses or goggles. Keep others and animals away from work site. It is best to pressure wash under cooler, non-windy conditions. Do not allow cleaner to dry on surface before rinsing. Always test on an inconspicuous area first. Do not mix with bleach or any other chemicals.</p><p><b>IMPORTANT TIPS: </b>For vertical surfaces, apply solution from lower to higher areas and rinse from higher to lower areas to prevent streaking. After the job is done, rinse all lawn, plants, shrubs and trees contacted by the cleaner, and flush equipment with water before storage. Runoff may temporarily discolor some asphalt sealers - divert runoff or test in a small area first. Pressure washing may remove oxidized paint and weathered stains.</p><p><b>PRESSURE WASHING:</b></p><ul><li> Drop the siphon tube into the bottle or fill the on-board "soap reservoir".</li><li> Switch equipment to plain water at low pressure and wet surface.</li><li> At low-pressure setting, apply Simple Green Oxy Solve to an area that is small enough to be rinsed before it dries.</li><li> Allow cleaner to dwell on surface for 3-5 minutes.</li><li> Rinse at high pressure, keeping the nozzle at least 2 feet from the surface and the spray perpendicular to the surface.</li></ul><p><br /></p><p><b>MANUAL CLEANING: </b>Mix 1-measure of Simple Green Oxy Solve with 20-measures of water in a bucket (example: 1.5 cups Simple Green to 2 gallons water). Clean in sections with a soft-bristle brush or sponge. Do not allow cleaner to dry on surface before rinsing. Rinse with a garden hose at highest pressure. Move to a new section and repeat.</p> <p><b>How To Use</b></p><p>Dilute with ambient water. Apply to soiled surfaces, allow time to penetrate dirt, grease or oil; rinse with water at highest available pressure. Heavily impacted soils may need agitation or second application. Do not allow product to dry on surface.</p><p>DILUTION INSTRUCTIONS</p><p>Heavy Cleaning</p><p>Thick grease, oil, carbons and soot, baked-on soils, tough soils lodged in porous surfaces: Up to 15 Parts Water</p><p>Medium Cleaning</p><p>Greases and oils, most metal working fluids, hydraulic fluids, dirt, grime, food residue: 15-30 Parts Water</p><p>Light Cleaning</p><p>Dusts, particulates, very light oils: 30+ Parts Water</p><p>Mechanical Assistance</p><p>Scrubbing, brushing, pressure, steam, heat, air agitation, etc.: 25-30 Parts Water</p><p>Glass, mirrors, lenses, and reflective surfaces: 60+ Parts Water</p> <p><b>Usage Information</b></p><p>Wear rubber gloves. To open, press tab in and hold down while turning nozzle. Spray surface to cover soiled area. Wipe with damp cloth or sponge. Rinse well with water. To close, turn nozzle back until tab locks into position. Always re-close after use and store closed. Note: Do not use on natural marble, stone, terrazzo, polished or anodized aluminum, metallic or painted surfaces, colored grout or counter tops. May etch some older or worn porcelain tubs and sinks or ceramic tile. If in doubt, test hidden areas first. Avoid contact with wood, fabric and wallpaper. Wipe up spills immediately and rinse with water. Not for use on food contact surfaces. Do not use on cookware, coffee makers, tea kettles, humidifiers and washing machines.</p> <p><b>Usage Instructions:</b></p> <ul> <li>Do not use in automatic dishwashers.</li> </ul> <p>Always spot test on a hidden area first. This sprayer can deliver in a spray or a foam. Simple Green Lime Scale Remover is highly effective when applied as a foam.</p><ul><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>Spray onto surface, or apply with a damp sponge or cloth</li><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>Scrub around fixtures with a stiff, non-metallic brush to loosen heavy deposit build-up.</li><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>Immediately rinse thoroughly for shiny, clean results.</li></ul> <p>Always test on an inconspicuous area first. Apply directly on surface to be cleaned and allow to penetrate briefly. Wipe off<br />with a clean cloth or towel.</p> For older, more difficult jobs, apply a generous amount of cleaner and allow to stand for a few minutes before wiping dry. For extremely tough jobs such as the removal of old, dried latex paint, scrub with a brush or scouring pad and wipe off with a wet rag. For engine cleaning, use on a cold, dry engine. Do not use on varnished surfaces or leather. When used in a food processing facility, rinse with potable water after use. Do not mix this product with any other chemicals <p>Shake well before using.</p> <ul> <li>Spray directly onto surface</li> <li>Wipe in the direction of the natural metal grain using a clean, soft cloth</li> <li>Buff with a dry cloth to achieve a brilliant shine</li> </ul> <p>Wet the PUMIE stone in water. Gently rub the stain away using back and forth strokes until the deposit disappears. Clean stick of residue in bowl water or hold under faucet. Hang or place PUMIE with other cleaning supplies for periodic bowl cleaning.</p><p>CAUTION. Some colored porcelain bowls are fragile and may be damaged by abrasive cleaning materials. Test a small area before proceeding.</p> <ul><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>Spot test on an inconspicuous area before applying.</li><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>Apply product directly to stain. Dilution and dwell time may vary by soil load.</li><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>Rinse promptly with cold water.</li><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>Repeat application as necessary.</li></ul><p><br></p><ul><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>1.For light soils: Mix 1 part CLR and 4 parts warm water</li><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>2.For medium soils: Mix equal parts (1:1) CLR and warm water</li><li data-list="bullet"><span class="ql-ui" contenteditable="false"></span>3. For heavy soils: Use full strength CLR </li></ul> <ul><li>Appliances should be turned off and cool.</li><li>Wipe or clean any residual cleaning product before using Stainless Steel.</li><li>Shake well before each application.</li><li>Hold can 6 inches from surface and spray lightly.</li><li>Wipe area with clean soft cloth.</li><li>Heavily soiled areas may need a second application.</li></ul> <ul><li>Spot test on an inconspicous area before applying. Dwell time may vary by soil load.</li><li>Clean object first by washing with warm soapy water and drying completely. Dip soft cloth in Tarnish Remover and wipe on tarnished areas.</li><li>Rinse completely under cold water and wipe dry.</li><li>For heavily tarnished pieces, repeat above process until all tarnish is removed.</li></ul><p><b>IMPORTANT</b></p><p>FOR USE on sterling silver, silver plate, platimun, copper, gold, diamonds.</p><p>DO NOT USE on stainless steel, chrome, pewter, aluminum, brass, zinc, marble, steel knives, artificially oxidized silver, lacquered surfaces, pearls, opals or porous stones. Avoid spilling on laminates, countertops, Formica, or syntethic surfaces which may be affected; clean spill immediately.</p> <ul><li>Spot test on an inconspicuous area before applying.</li><li>Apply product directly to stain. Dilution and dwell time may vary by soil load.</li><li>Rinse promptly with cold water.</li><li>Repeat application as necessary.</li></ul><p>For light soils: Mix 1 part CLR and 4 parts warm water</p><p>For medium soils: Mix equal parts (1:1) CLR and warm water</p><p>For heavy soils: Use full strength CLR</p>
Specialty Cleaners/Lubricants Sort by Display Order Price: High to Low Price: Low to High Name: A to Z Name: Z to A Created on
Display 6 12 18 per page
ZPEZUMILDEW32
Spray - 32 fl oz (1 quart) - 1 Each - Blue
RAC87103
For Multipurpose - Liquid - 22 fl oz (0.7 quart) - Recommended For: Limescale Remover, Calcium Deposit Remover, Stain Remover, Hard Water Remover, Rust Remover - Unscented, Easy to Use - Green Spray Bottle - 1 Each
BET0652300
Ready-To-Use - 17 oz (1.06 lb)Aerosol Spray Can - 1 Each - Grease Resistant, Water Spot Resistant, Spill Resistant, Dirt Resistant, Fingerprint Resistant
/* Added for Digitol */ /* End Added for Digitol */
